Gypsum-based Cornice Compound


    Xây Dựng Xây Dựng

Gypsum-based Cornice Compound

0

Gypsum-based adhesive to be used as mounting binder for gypsum cornices. For interior use only! 

Share
Formulation Parts
Beta-Gypsum Hemihydrate 50 – 80
Calcium Carbonate Sand 0 - 1.0 mm 20 – 50
Gypsum Retarder 0.05 – 0.15
BERMOCOLL Cellulose Ether (high viscous) 0.1 – 0.3
ELOTEX Thickener 0.03 – 0.08
ELOTEX Redispersible Powder 2 – 3
Water approx. 30-50%

 


We recommend the following AkzoNobel products for this formulation:

Redispersible Powder Hydrophobic Additive Cellulose Ether
MP2050 ELOSET542 CCM 890
  ELOSET543 CCA 328

Own Formulation

We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant. 

 
Please Note

This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products. 

Write a review