Standard Tile Adhesive Mortar


    Xây Dựng Xây Dựng

Standard Tile Adhesive Mortar

0

Tile adhesive for laying of ceramic tile floor and wall coverings. Suitable for applications of porous and vitreous ceramic tiles. 

Share
Formulation Parts
Portland Cement CEM I 42.5 30 – 40
Calcium Carbonate 40 - 100 µm 10 – 20
Quartz Sand 0.1 – 0.3 mm (if necessary 0.5 mm) 40 – 50
BERMOCOLL Cellulose Ether (Bermocoll M70) 0.2 – 0.4
ELOTEX Redispersible Powder (MP2050) 0.5 – 1.5
Water approx. 24%

 

We recommend the following AkzoNobel products for this formulation:

Redispersible Powder Thickener Cellulose Ether
MP2050 ELOSET542 M70
  (Optional)  

Own Formulation

We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant. 

 
Please Note

This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products. 

Write a review